Green Shopping Direct

This 600 mah (approx 10 watt) solar panel comes with a cable that can connect to a battery or various other devices. The internal batteries of your wireless electronics can be charged by connecting the PowerFilm® Rollable Solar Panel to your device's 12V cigarette lighter adapter by using the included RA-2 Female Cigarette Lighter Adapter. (additional adapters available separately)

This 300 mah (approx 5 watt) solar panel comes with a cable that can connect to a battery or various other devices. The internal batteries of your wireless electronics can be charged by connecting the PowerFilm® Rollable Solar Panel to your device's 12V cigarette lighter adapter by using the included RA-2 Female Cigarette Lighter Adapter. (additional adapters available separately)

Simply Rugged: No Spring-loaded Contacts Unlike other universal smart chargers, the Powerex MH-C808M uses rugged fixed contacts rather than spring-loaded ones, enhancing product reliability. It also features a rugged DIN power connector found only in professional products. Selectable Soft and Rapid Charging Mode The MH-C808M provides user with the option to choose between a soft charge and a fast charge mode. The Soft mode delivers the highest battery life and allows 100% compatibility with older, lower capacity batteries. Low-Temperature Charging Algorithm The MH-C808M is the coolest rapid charger in Powerex's line of professional products. Low charging temperature maximizes battery life and performance. Built-in Deep Battery Conditioning System The MH-C808M is embedded with a high-rate battery conditioner that will charge, deep-discharge and recharge batteries automatically. Heavy Duty Worldwide AC Adapter The unit includes a heavy duty switching AC power supply. The 100-240V 50/60Hz universal adapter employs a rugged DIN connector for reliable contact. Supported Batteries: One to Eight AA, AAA / C /D NiMH or NiCD Rapid Charge Current: 2000mA (AA, C, D), 700mA (AAA) Charge Time: AA: 1 Hour (Normal), 2 Hour (Soft Charging), C / D: 1-5 Hour (Normal), 5-10 Hour (Soft Charging) Power Supply: Worldwide Switching AC Adapter 100-240V 50/60Hz with removable cord

Four independent charge channels It's like having four charger-analyzers for AA and AAA NiMH / NiCD batteries. Large backlit LCD display Digitally displays capacity, voltage, time and current. 29 selectable charging and discharging rates. Charging current from 0.2A to 2.0A and discharging current from 0.1A to 1.0A in 0.1A increments. Five modes of operation 1. Charge: Recharges the battery at the selected rate. Suitable for batteries used frequently. 2. Refresh & Analyze: Charges the battery, rest for one hour, discharge, rest again, then recharges it. Selectable charging and discharging rate. Suitable for batteries stored for more than two weeks but less than 3 month or those showing poor performance. 3. Break-In: Also known as IEC capacity measurement and "Battery Forming". Charges battery at 0.1C for 16 hours, rest for one hour, discharges battery at 0.2C, then recharges again at 0.1C for 16 hours. Suitable for new batteries and those stored for more than 3 month. 4. Discharge: Discharges the battery at the selected rate. 5. Cycle: Performs charge-discharge cycle for up to 12 times with discharge capacity stored in memory. Recharges battery after final cycle. This is an excellent smart charger and analyser that allows you to take care of your batteries and maximize your digital devices runtime! Battery Matching In most devices, usually two or more batteries are used together. When batteries are used in a series, the performance is limited by the worst one. In other words, one poorly performing battery can significantly reduce the device runtime. Battery matching refers to grouping batteries with similar ?actual? capacity. To perform this, use the Refresh & Analyze mode to determine the battery capacity. Group batteries with capacity within about +/- 5% of the rated capacity. Battery Forming aka battery conditioning New batteries and those stored for extended period become chemically deactivated. Battery forming is a charge-discharge-charge cycle which forces a full charge into the battery at a very slow rate. This process activates the battery. In certain cases, it needs to be repeated two or three times. Battery forming can be performed using the Break-In mode. Delivers just the right charge Independent negative delta V, temperature and timer protection eliminates over and undercharging. Super light travel worldwide power supply and 12V compatible Worldwide 100-240V switching adapter - light weight and small. Also compatible with 12V input. Will work on car when used with the optional cigarette lighter adapter. Charging Current: Programmable from 0.2A to 2.0A in increments of 0.1A Topoff Charging Current: 100mA Maintenance Charging Current: 10mA Discharge Termination: Voltage 1.00V Discharge Current: Programmable from 0.1A to 1.0A in increments of 0.1A Capacity Storage Memory: 12 (Cycle mode only) Supported Capacity: 100 to 20,000mAh. Charger Input Power: 12V 2.0A Adapter Input: 100-240V 50/60Hz

This portable/foldable solar AA battery charger is really great! It is not as flexible as getting a battery charger with a CLA and a seprate solar panel but reaally simple adn easy for folks that want, well... simple and easy! 2 batteries - full charge in about 4 hours of full sun. 4 batteries - full charge in about 8 hours of full sun. Charge rate is: ~ 600mAh but you may experience variations due to sun exposure, etc. Batteries not included. You can charge any AA NiCD or NiMH battery in this unit. integrates lightweight, rugged powerfilm® flexible solar panels directly with fabric. charging lights confirm if batteries are charging or fully charged. rugged construction with 6 grommets for easy attachment. (originally designed for the military) charger adds less weight than carrying 4 extra batteries. 1 year warranty from manufacturer in addition to our greenbatteries.com satisfaction guarantee. patent applied for. Caution: never charge alkaline batteries in this charger, they could leak and become dangerous.

This is truly an amazing battery tester. This is the only tester we have seen that can quickly indicate the charge level on almost any battery. Inexpensive battery checkers can give a good indication of the charge level of alkaline batteries, but the ZTS Multi-Battery Tester can quickly show the charge level of rechargeable NiMh and NiCd batteries as well. The ZTS Multi-Battery Tester (MBT) can check more than 30 battery types, including the popular NiMH and NiCd rechargeable batteries. Its microprocessor-controlled pulse load test is the most advanced and accurate available. The MBT computes the battery's remaining power capacity (between 10-100%) during each test. It is easy to use - no switches or settings. Microprocessor controlled pulse load placed on the battery at the time of testing gives a clear reading of the battery charge level. The ZTS-Multi-Battery tester doesn't have the ability to measure battery capacity (ie it won't be able to check if a battery is 1500 mAh or 2000 mAh) since that requires a tester which completely drains the battery over several hours. Testing Capability: 3.6v Li-Ion rechargeable RCR123A, 18500, 17650, 18650] 1.5v button cell

Overview iSun® is the perfect portable power charger power solution for people on the go. Whether you need to charge your cell phone or PDA while on a business trip, charge your GPS while trekking through the wilderness or run your MP3 player at the beach, the iSun® can make it happen. The iSun® can also be connected to the BattPak™ as a nimh solar charger to charge AA and AAA batteries. Combined with the accessories iSun® Battpak™, the most versatile battery charger / portable power source in the universe. FAQ - This solar charger puts out a trickle charge and so it will not work on our TurboCharger LX series li-ion chargers because they require a fast charge DC current of about 1,000mA at 12 volts and the ICP solar charger delivers a maximum current of 145mA at about 15 volts. (see Peak Output stats below to determine compatibility with your device before ordering. Available in the sleek silver finish (iSun®) Includes plugging accessories that will enable you to run over 90% of all small electronics 6V / 12V charging option Daisy-chain multiple units for additional power Works in all sunny conditions Model Number: 4061 Wattage: 2.2 watts Peak Output: 290 mAmps@7.6 volts / 145 mAmps@15.2 volts Approx. Watt-Hrs / Day *: 8.8 - 11 Approx. Amp Hrs / Day *: 1.2 - 1.5 (7.6V) / 0.6 - 0.73 (15.2V) Dimensions: 7.25" x 4.5" x 1.25" / 184 mm x 114 mm x 32 mm Weight: 0.68 lbs / 311 g Temperature Range: -40ºF to 176ºF / -40ºC to 80ºC Warranty: 2 years

Microprocessor automatically switches to trickle charge after batteries are finished charging so that they maintain their charge. Compatible with 7.2V, 8.4V, and 9.6V Rechargeable 9V Batteries. Individual LED for each charging channels indicates when batteries are ready to go. No guessing about batteries. Green means ready and Red means charging. Capable of even reviving older 9V batteries which may no longer be accepting a charge. Rapid Charge Current: 70-90mA Trickle Charge Current: 10mA Charging Cell Configuration: One to Ten 9V Batteries (7.2V, 8.4V or 9.6V) Microprocessor: Negative Delta V, Ten Independent channels Charge Time: 120-160 minutes Power Supply Voltage: 110V AC adapter outputs at 15V 1000mA

This really cool charger has lots of features that are sure to satisfy the technically minded among us. This charger is not only a smart charger, but has discharge features, automated recondition features and even a test feature. This charger has complete instructions included by the distributor LaCrosse Technology that are very detailed. Four separate charge channels - charge one, two three or four batteries at a time - even on individual charge programs, i.e.- test one battery while charging the others. All modes automatically default to 200 mA charge but are user selectable up to 1000 mA for four batteries and up to 1800 mA for two. Charge both AA and AAA rechargeable batteries simultaneously. Overheat detection to protect from over-charging. Comes with 4 - 2000mAh AA and 4 - 750 mAh AAA LaCrosse Technology branded NiMH batteries. Comes with 4 - C and D battery adapters and a nylon carrying case. Just like in the picture! 110-240 AC adapter included. No DC car adapter available... To get the PDF manual for the BC 900 - click here!

The la crosse technology bc700 alpha power battery charger has four modes and charges all nicd and nimh aa and aaa rechargeable batteries. the four modes include charge, discharge (discharges the batteries and then recharges them), recharge (discharges and recharges up to 20 times to bring old batteries back to life) and test (displays the battery capacity). bc-700 battery charger features: ? all modes automatically default to 200 ma charge on the bc-700 battery charger ? charge both aa and aaa rechargeable batteries simultaneously and will charge all low-discharge batteries. sanyo eneloop, uniross hybrio, nexcell energyon, accupower acculoop and other future low discharge batteries. ? has four independent channels - charges 1, 2, 3 , or 4 rechargeable batteries at a time. overheat detection to protect over-charging and lcd shows capacity for each battery when charging is complete. charge mode - allows a range of user selectable milliamp settings from 200 to 700 for faster charging times. within 4 seconds after rechargeable batteries are inserted charging automatically begins at 200ma, or you may select 500, or 700ma charge rates for faster charging times. discharge mode - reduces memory effect by discharging rechargeable battery completely before recharging to full capacity. user selectable. refresh mode - discharges and recharges up to 20 cycles or until rechargeable battery is refreshed to full capacity. user selectable. test mode- first charges the rechargeable battery to full capacity, then discharges completely to measure rechargeable battery capacity for display in mah or ah, and then recharges each rechargeable battery to full battery capacity. ul approved, bc 700 charger also has safeguards that sense rechargeable battery polarity, rechargeable battery temperature and defective rechargeable batteries. world voltage capable - operates on 100~240v ac input. automatically defaults to 200ma charge (the optimal setting for prolonging battery life) max charging capacity: 3000 mah overheat detection to protect over-charging select different charging current for each channel automatically switches to trickle charge when charging is complete to ensure maximum battery capacity 7, easy-to-use function keys charge mode (charging current) discharge mode (discharging current) refresh mode (time elapsed) test mode (accumulated capacity) lcd shows capacity for each battery when charging is complete input voltage for ac/dc adapter: 100-240 vac charging current range: 200 mah, 500mah, or 700mah

This universal battery charger is perfect for typical household use. Charges D / C / AA / AAA / 9V NiMH high capacity batteries. (2 or 4 pcs of NiMH AA, AAA, C, D or 1 to 2 pcs of 9V) Compact size. Automatic charging current selection. Corded charger with AC adapter. 3 LED indicators (2 for D/C/AA/AAA, 1 for 9V batteries) Safety guaranteed by GP Batteries are not included.

This Litium Ion battery pack is not manufactured by Sony but is designed to meet or exceed the origional Sony battery specifications. Guaranteed to work with the following Sony camera models: Sony GV-A700, GV-D800, CCD-SC5, CCD-TR3 7.2V 1850 mAh